9
TANDBERG FieldView Device User Guide
D14041.02 January 2008
3.5. VoIP Telephone Communication
For conversation, the FieldView Device can operate using its built-in
microphone and speaker, or a headset:
Speaker phone. If a headset is not attached, the FieldView Device operates
as a speaker phone using a built-in omni-directional microphone and speaker.
Headset. If you plug a headset into the headset connector the FieldView
Device uses the headset microphone and speaker. This is useful in noisy
environments or where privacy is a concern. In this case, Subject Audio
continues to use the built-in microphone or external audio line-in, if selected.
Note that if the Operator needs to capture particular sounds as part of the
video stream (e.g., an odd noise being made by a piece of machinery), you
can change the subject audio source, as described in Setting the Subject Audio
Source on page 10.