TANDBERG D14041.02 Digital Camera User Manual


 
3
TANDBERG FieldView Device User Guide
D14041.02 January 2008
1.3.2. Navigation Pad Buttons
These context-sensitive buttons control audio volume, microphone mute and
the front light. They also function as command buttons and directional buttons
for the menus.
Button Function MenuFunction
Start or accept call (Send) OK or Enter
End a call or reject an incoming call
invitation
Cancel
Increase volume Up arrow
Microphone mute Left arrow
Decrease volume Down arrow
Front illumination light on/off Right arrow
Enter Accept
1.3.3. Zoom/ManualFocusControls
The Zoom buttons are located on the back of the FieldView Device, directly
above the Navigation Pad. These allow the Operator to set zoom levels on the
camera or to set focus manually (see page 11).
1.3.4. Indicators
Indicator Name Explanation
Power mode indicator Green = On or Standby
Network indicator Green = Network available
Off = Network unavailable
Battery/power
indicator
Orange = Battery is charging
Off = Battery is charged or power is not
connected
Stream/record Red = streaming/recording on.
Off = streaming/recording off
Network connector The Ethernet Port (shown as #15 on the
diagram on page 2) also includes an LED
indicator:
Yellow On = a wired network link exists.
Yellow Flashing – indicates wired network
activity
Yellow Off = no wired network link
The green LED is not used at this time.
1.3.5. SoftKeys
Some screens contain on-screen keys or buttons, e.g., Accept or Cancel on
a conguration screen. You can select these buttons by tapping the key with
your stylus, or by pressing Navigation pad keys.
Stream/record indicator