Filter
Top Products
Page 14 of 69
Step 6. Place the camera on the
mounting bracket platform and rotate
the camera to be facing in the desired
direction.
Step 7. Secure the camera to the
mounting bracket using the
thumbscrew located on the bottom of
the platform.
Step 1
. Find a suitable location to mount the camera.
Step 2. Using the mounting bracket as a guide, mark the location of the two
mounting holes.
Step 3. Drill a ¼” hole for each screw.
Step 4. Use a hammer to tap the two plastic anchors into the holes.
Step 5. Use the two screws to fasten the bracket to the wall.
Step 8
. Loosen the tilt adjust thumbscre
w
and tilt the camera toward the area to be
observed.