Filter
Top Products
Page 33 of 69
Recording a Video
1. Adjust the volume using the Audio Level Slider.
2. Click [Record] to record your video. Click the Stop button any time to end recording.
3. After the recording stops, the following buttons will appear on the bottom of the screen:
[Save Frame] - Saves the current frame as a picture file.
[Trim Video] - Trim the video to the selected size and length.
Drag the sliders to select the new start point and end point of video
[Play] - Play the video.
[Cancel] - Discard the clip and return to live video.
4. Click to save your video.
Multi-Camera Viewing
Click the Views button to go to the multi-camera viewing window. If you are currently logged in to a
camera, its video appears at the top left of the multi-camera viewing area. You can now select up to
three additional cameras to log in to from the drop down list at the top. If you have defined any camera
groups, you can log in to the whole group at once by selecting the group name from the list. The connection
status dialog will show the status of connecting to each camera and then each camera’s video will appear in one
of the other three video windows.
Enable Audio Click on a camera’s video window to select it. A yellow outline will appear around the window.
You may now enable audio for that camera by clicking the audio enable button. Click on another camera’s
window to hear its audio.
Refresh Click the Refresh button to refresh the camera screen.
Show/Hide Click the Show/Hide button to show or hide cameras that you have logged in to.
Layout Click the Layout button to change the layout of the multi-camera viewing area. The default is four
medium (320 x240) camera views on one screen. Changing this setting to One Camera View, will give one large
camera view on each screen and a vertical scroll bar will appear on the right side allowing you to scroll down to
see other camera views.
Views Click the Views button to return to the single camera viewing window. The currently selected camera
will be active. You will not be logged out of any other cameras you are logged in to.
Note: The captured video will be the same size (resolution) as the current streaming size. Changing
the display size using the image display controls does not affect the size of the captured video. Use
the Settings button to change the streaming size (requires admin level user).