Filter
Top Products
Page 7 of 69
1.3 Hardware Description and Features
1 Network Activity LED
The green LED indicates if there is a connection to your network. If there is
network activity, the green LED will blink.
2
External Microphone
Connection Port
Connect a standard 1/8” (3.5 mm) computer microphone into this port to
monitor/record audio further away. (External microphone not included)
3 Motion Sensor Jack
Connect an external motion sensor to trigger email alerts with images attached.
See the motion detection section for more information. (Optional)
4
External Power
Connector
Connect the included power supply. Warning: Use only the included power
supply or you may damage your camera.
5
RJ-45 Ethernet Port
(Observer only)
Used to connect the Observer to your LAN using the included Ethernet cable.
6
Serial Port
(Wireless Observer)
Used to configure your wireless settings using the included serial cable.
Power Button
Turn the camera on or off. When
the power button is held down
while the camera is on for 6
seconds the camera settings will
reset to the factory defaults.
The power button light will blink
when video is being streamed.
Lens
VGA CCD sensor with
fixed focus lens.
Microphone
Monitor or record
sound using the built-
in microphone.
Observer
-
Connections
Antenna
Wireless Observer
Observer
Wireless Observer
-
Connections
1
1
2
2
3
3
4
4
5
6