A SERVICE OF

logo

Advanced Configuration and Management Guide
Figure 13.4 Router2 becomes active router after links e1 and e3 fail with multiple track ports defined
Independent Operation of RIP and OSPF
SRP operation is independent of the RIP and OSPF protocols. RIP and OSPF operation will be unaffected when
SRP is enabled on its interfaces.
Dynamic SRP Configuration
All SRP global and interface parameters are dynamically activated. You do not need to reset the system to place
SRP configuration parameters into effect.
13 - 6
Router2
Router1
PC 4 PC 3PC 2PC 1
e1 e2
e3
e4
SSSS
AAAA
A=Active
S=Standby
Active
Standby