Filter
Top Products
QSP-660: Instructions for Basic Operation and Installation
Page 9
Other Display Options
1: Location Lower Right
2: Display On
Camera: Select
DISPLAY: Accept and Return
Camera Set Up
1: Labels on Display: On
2: Change Labels . . .
PIP: Restore Default Settings
Camera: Select
DISPLAY: Accept and Return
Camera Labels Characters
PIP: Space 0
1. . . . . . . . . . . 1: ABC1
2. 2 2: DEF2
3. 3 3: GHI3
4. 4 4: JKL4
5: MNO5
6: PQR6
7: STU7
8: VWX8
9: YZ9
5 is VCR + 1
6 is VCR + 2
7 is VCR + 3
8 is VCR + 4
9 is QUADRANT
SEQUENCE: Next Character
DISPLAY: Accept Label
Other Display Options
This menu determines the display behavior of the date and
time information for both the VCR and monitor camera
displays.
Selecting:
1. Toggles the time and date display location through
any one of the four display quadrants for live camera
displays.
2. Toggles the time and date for the monitor display
On/Off.
A
DVANCED
F
UNCTION
M
ENUS
This section describes the use of the advanced functions of the QSP-660. The following features allow you to
customize the operation of your QSP-660 as necessary to complete your installation.
Camera Set Up
This menu determines the display behavior of the camera
labels and allows access to menus for entering/changing
labels.
Selecting:
1. Toggles the camera labels On/Off for the monitor display.
2. Enters Camera Labels menu to review, enter, or change
camera labels.
Camera Label Changing
This menu is used for adding/changing labels that are
associated with each of the four cameras.
Selecting:
1 - 4
Selects the camera for editing and exposes the
legend at the right hand side of the screen. After
pressing a camera button
1
through
4
, the display
will appear as shown.
Using the legend, any character can be entered in the present
character location. The
SEQUENCE
button is used to move
to the next location.