Filter
Top Products
150
WATCHING THE CAPTURED IMAGES ON TV
The Argus DC3810 camera has a video-out terminal to view captured images on your TV set with the
video cable that came with your DC3810.
1.Confirm that the video out signal from the video-out terminal is set to NTSC or
PAL according to the color system in your country. ( see page 124 ).
2.Turn off power to both camera and TV.
3.Open the terminal cover on the left side of the camera and connect the mini
plug of the supplied video cable to the video-out terminal of the camera.
4.Connect the other end of the video cable to the video input terminal on the TV.
5.Turn on the power to the TV.
6.Rotate the function dial to
7.Turn on the camera.
8.Switch the video input of the TV according to the terminal to which the video
cable is connected.
• The images recorded in the CF card can be displayed both on the LCD monitor and TV.
9.You can now view the images in the various play modes.
• To view your images in the slide show mode, see page 82.