Filter
Top Products
154
Problem
The image is too
dark or bright.
The recorded
image file is
damaged.
The camera
does not function
properly.
Cause
Exposure rate is too short. (dark)
Exposure rate is too long. (bright)
Removing the CF card while data
is transferring to or from it.
Solution
Select a longer exposure rate to lighten photo.
Select a shorter exposure rate to darken photo.
Any images damaged cannot be recovered.
Page
99
-
Slide the power switch to turn off the camera. Ensure that the camera is off.
Remove the batteries, wait 10 seconds, then reinsert them. When using an
adapter, unplug it from the AC outlet, wait 10 seconds, then plug it back in.
Slide the power switch to turn on the camera.
If the camera is not turned off correctly, damage to the CF card may result. If
you suspect the CF card is not functioning properly, try reformatting it.
119