Filter
Top Products
13
F
S1 S4
S2
S3
4 Setup
4.1 Inserting the Optic
For a complete and working IVS, either the optic silent or
the optic academy must be installed inside the CCD optic
module.
A 1.5 mm allen key is used.
Do not touch optical surfaces.
All lenses must be clean.
Do not use force.
• Turn the protecting cap at the end of the CCD optic
module § counter clockwise and remove it to
access the lens receptacle.
• Remove the cover on the front side of the CCD optic
module § by turning it counter-clockwise to
access the alignment screw.
• Make sure that the focus screw (S3) § and the
alignment screws (S1, S2 and S4) § are in the
middle of their range.
protecting cap
cover
Setup