Filter
Top Products
26
flicker module and the camera (RS-connector).
Note: It is recommended to observe the color coding
to ensure that the cable is as close to the camera
as possible.
• Connect the data cable ZV4 § between the
camera (CCU-connector) and the IVS.
Without a data cable ZV4 Time-Code and Pull-Down
information as well as data transfer to the IVS via the
serial interface are not available.
Note: If neither time code is used nor data is sent via
the serial interface, it is possible to work without
the data cable ZV4.
RS cabledata cable ZV4
Setup