Filter
Top Products
43
• Pressing the key ß or ü will move the cursor > up or
down. Pressing the key ä or ö activates sub menus.
• Within sub menus the cursor > can be moved up and
down again by pressing the key ß or ü. The keys
ä or ö will now change settings (e. g. switch the
insertion of a time code window on and off), or
activates functions (position mode of a window,
EXIT or the ALL STANDARD call).
• If the window´s position mode is activated, the keys
ß, ü, ä or ö will move the window across the
video image. To leave the position mode press the key
ENTER INSERT briefly.
• To go from a sub menu back to the main menu,
position the cursor > by using the keys ß and ü on
the line EXIT and press the key ä or ö.
All settings are immediately activated
by changing them.
Note: Pressing the key ENTER INSERT for more than
three seconds will cause the system to exit the
onscreen programming mode completely,
regardless of which menu is activated, with the
exception of the positioning mode.
Inserter Facilities