Filter
Top Products
42
MGC
MGC
ENTER
INSERT
MODE
STO
FR
WB
MGC
MM
ONON
ATW
ON
STO
CMP
COMPOSITE
Y/C
6.1 Setting the
On Screen Displays
Note: The on screen displays are only available
at OUT 2 if composite is selected.
In case of Y/C or mini monitor output, the
on screen displays are available when
”video with data” is selected.
An illuminated LED indicates that on screen programming
is activated.
During programming the inserted data is not
fully updated (i. e. Pull down information, TC-
Frame Count).
To get information updated, leave the on screen
display menu by pressing the key E
NTER
I
NSERT
for more than three seconds.
• Once the onscreen display is activated by pressing the
key ENTER INSERT for more than three seconds, the
following procedure is used to select and set all
functions within the main menu and the sub menus:
ENTER INSERT key
Inserter Facilities