Filter
Top Products
82
SUB MENU
DISPLAY
> VERT.
POS. 3
WHITE
LEVEL 2
ALL
STANDARD
EXIT
INVERSE OFF
6.9.1 Vertical Position
By changing the setting in the line VERTICAL
POSITION of this sub menu it is possible to simul-
taneously shift all man-readable windows with the exception
of the format markings vertically by one video line (fine-tune).
The individual steps are smaller than the steps in the
normal position mode. This will place all windows as far
outside the actual image area as possible.
• Move the cursor > with the keys ß and ü to the line
VERT.. By pressing the key ä the value will
increment starting from 0 to 9, after that it will go
back to 0. Higher values will cause the windows to be
at a higher video line. They will therefore appear
lower on the video screen.
The key ö will decrement in the opposite direction.