Filter
Top Products
58
> -SET <> E
-RESET 0107m
EXIT
>
>
>
>
>
>
> -SET <> E
-RESET 0107m
EXIT
>
>
>
>
>
>
> -SET <> E
-RESET 0107m
EXIT
>
>
>
SUB MENU
STATUS ON
POSITION
SIZE SMALL
BACK-
GROUND BOXED
IVS-FILM
COUNTER ON
-MODE DOWN
> -SET <> E
-RESET 0107m
EXIT
CAM-DIR FWD
>
>
>
>
>
>
IVS Film Counter Set
The IVS film counter can be preset to a given value.
This enables the user to set the length of the film material
and have an indication of the remaining film length in the
magazine.
Note: For counting the remaining film the IVS film
counter mode must be set to count down.
• Move the cursor > with the keys ß and ü to the line
-SET. Pressing the keys ä or ö will lead into the
set menu. Within this set menu, it is possible to change
the active digit which is the digit, marked with the ^
symbol.
• The ä key will move the ^ symbol from the first digit
one digit right.
• By pressing the same key, the ^ symbol will continue
to move right to the last digit, which is M for meter or
FT for feet. After that, it will return to the first digit.
• The ö key will move the ^ symbol in the opposite
direction.
Inserter Facilities