Filter
Top Products
24
F
S1 S4
S2
S3
• Make sure that the focus screw (S3) § and the
alignment screws (S1, S2 and S4) § are in the
middle of their range.
• Place the cover back on the CCD optic module.
• Take the video lens out of the CCD optic module by
turning the front ring of the lens counter-clockwise until
loose and pull the lens forwards to remove.
• Insert the respective video lens with the thread first into
the CCD optic module as far as it will go §.
Turn the lens left or right to insert the iris key into its path
and push the lens further in.
Close the thread clockwise until the lens is secured.
The video lens must be properly inserted into
the lens mount until the end of the thread.
Uncomplete insertion might result in damage to
the beam splitter when attaching the unit to the
camera body.
Setup