Filter
Top Products
47
SUB MENU
FORMAT 1
> POSITION<> E
EDGE 1
WHITE
LEVEL 3
OUTSIDE FULL
EXIT
>
>
6.3.2 Position - Positioning of the
Format Markings
The format markings can be adapted to every different
format. The format markings on the ground glass serve as
a reference.
To align the electronic format markings with the ground
glass markings proceed as follows:
• Point the film camera towards a bright object so that
the format markings on the ground glass are clearly
visible.
• Move the cursor > with the keys ß and ü to the line
POSITION. Call the positioning mode with the
keys ä or ö. The sub menu is displayed on the
screen §.
The symbol indicates that it is now possible to move
the left and the upper line of format 1.
The keys ä or ö move the vertical line right or left,
the keys ß or ü move the horizontal line up and down.
• When the correct position has been set, confirm by
pressing the key ENTER LNSERT briefly.
The symbol will now change from to . It is now
possible to set the lower and right line with the keys
ß, ü, ä or ö.
• When the correct position has been set, confirm by
pressing the key ENTER INSERT briefly.
If both format markings are activated, the symbol
is now displayed. In this case the left and upper line of
format 2 can be set. Proceed as described above.
Inserter Facilities