Filter
Top Products
11
AXIS M1011/M1011-W/M1031-W - Accessing the Camera
AMC audio controls (AXIS M1031-W)
AMC audio controls monitor the client computer’s speaker output. These controls are only available when audio is enabled.
Note:
In Simplex – speaker only or microphone only mode, you can use either the Microphone button or the half-duplex Talk button to
stop sending audio to the network camera. To send audio, both buttons must be enabled.
Click the Speaker Button to switch the sound off and on to your computer's speaker.
If you have set your network camera to
half-duplex mode and the half-duplex Listen button appears first in the live
view page of your Axis network camera, you are only able
to receive audio from an external camera microphone. To
be able to send audio, click this button. See note below.
If you have set your network camera to half-duplex mode and th
e half-duplex Talk button appears in the live view
page of your Axis network camera if you push to talk, and you are only able to send audio to your Axis network cam-
era. To be able to receive audio, click this button.
Click the Microphone button to switch the sound off and on to your computer's microphone.
In Simplex
- Network Camera speaker only mode, you can click this button to stop sending audio to the network
camera. See note below.
Use this slider to control the volume of the speakers and the microphone.