Filter
Top Products
27
AXIS M1011/M1011-W/M1031-W - System Options
Audio Support
Enable audio support - Allow clients to retrieve audio streams from the AXIS M1031-W. See also Audio Settings (AXIS
M1031-W), on page 17 for information on how to configure the audio settings.
Note:
This
parameter will enable/disable audio globally in the camera, even for configured events and profiles with audio.
Date & Time
Current Server Time - displays the current date and time (24h clock). The time can be displayed in 12h clock format in the
overlay (see below).
New Server Time - select your time zone from the drop-down list. If you want the server clock to automatically adjust for
daylight savings time, select the Automatically adjust for daylight saving time changes.
From the Time Mo
de section, select the preferred method to use for setting the time:
• Sync
hronize with computer time - sets the time from the clock on your computer.
• Synchronize with NTP Server - the camera will obtain the time from an NTP server every 60 minutes.
• Set manually - this option allows you to manually set the time and date.
Note:
If using a host name for the NTP server, a DNS server must be configured under TCP/IP settings.
See Network > Basic TCP/IP Settings below.
Date & Time Format Used in Images - specify th
e formats for the date and time (12h or 24h) displayed in the video streams.
Use the predefined formats or use your own custom date and time
formats. See Advanced File Naming & Date/Time Formats
in the online help for information on how to create your own date and time formats.
Network
Basic TCP/IP Settings
The AXIS M1011/M1011-W/M1031-W supports both IP version 4 and IP version 6. Both versions may be enabled
simultaneously, and at least one version must always be enabled. When using IPv4, the IP address for the camera can be set
automatically via DHCP, or a static IP address can be set manually. If IPv6 is enabled, the network cameras receive an IP
address according to the configuration in the network router. There are also the option of using the AXIS Internet Dynamic
DNS Service. For more information on setting the IP address, please see the online help.
Network Settings - Click the View button for an overview of the IP configuration of the network camera.
Network Interface Mode - The network interface to the AXIS M1011-W/AXIS M1031-W Network Camera can be wired or
wireless. Different settings can be used for each network interface, but only one can be used at a time. Check the relevant
radio button to decide how the different network interfaces will be selected.
IPv4 Address Configuration - Ethernet - These settings are grouped according to the network interface and the version
of Internet Protocol (IP). The AXIS M1011/M1011-W/M1031-W supports both IP version 4 and IP version 6. Both versions may
be enabled simultaneously, and at least one version must always be enabled.
When using IPv4, the IP address for the camera can be set automaticall
y via DHCP, or a static (fixed) IP address can be set
manually. If IPv6 is enabled, the camera will receive an IP address according to the configuration in the network router.
There are also options for setting up notification of changes in the IP address,
and for using the AXIS Internet Dynamic DNS
Service. For more information on setting IP addresses, please see the online help .