Filter
Top Products
20
AXIS M1011/M1011-W/M1031-W - Live View Configuration
Viewer Settings
Check the Show viewer toolbar box to display the AXIS Media Control (AMC) or the QuickTime viewer toolbar under the video
image in your browser.
The administrator can disable the installation of the H.264, MPEG-4
, and AAC (AXIS M1031-W) decoders included with AMC.
This is used to prevent the installation of unlicensed copies. Further decoder licenses can be purchased from your Axis dealer.
Check the Enable rec
ording button to enable recording from the Live View page.
Action Buttons
The Show manual trigger button can be used to manually trigger and stop an event from the Live View page.
Check the Show snapsho
t button to save a snapshot from the video stream. This button is mainly intended for use with
browsers other than Internet Explorer, or when not using AXIS Media Control (AMC) to view the video stream. AMC for
Internet Explorer provides its own snapshot button.
Play audio clip enabled allows th
e user to pick an audio clip from a drop-down list and play it from the camera. See Audio
Clips (AXIS M1031-W), on page 18.
User-defined Links
User-defined links can be CGI links or web links. Once
configured, the link(s) appear on the Live View page.
To set up a web link, select the U
se as web link radio
button, enter a descriptive name and enter the URL in the
provided field. Click Save and the link appears in the Live
View page.
User defined CGI links can be used to issue VAPIX API
requests.
For more information on the VAPIX Application
Progr
amming Interface (API), see the Support/Network
Video/Developer pages on the Axis Web site at
http://www.axis.com
Please use the online help fil
es for more information.
Light Buttons
The network camera’s light can be controlled directly from
the Live View page, by enabling the display of light buttons.
To enable, select the type of control to use for the light. This
can be set as Pulse, where clicking the single button activates the
port with the defined Activate and Inactivate actions for the defined period, or as Active/Inactive, which displays 2 buttons,
one for each action. The selected type automatically displays the correct button(s) on the Live View page.
The pulse time can be set as short as 1/100
second, and as long as 60 seconds.
For advanced users it is also possible to specify a custom Activate and Inactivate command sequence, using Plain config.
Note:
The w
hite LED is not for continuous use.
User-defined Link