Filter
Top Products
Assembling Your Camera AXIS 2120 User’s Manual
10
Assembling Your Camera
The information provided in this section will assist you in unpacking and assembling the
product correctly. Once assembled, you are then ready to install and configure your
product, as described in the following sections of this document.
Checking the Hardware Inventory
Unpack and check all the items against the itemized list below. You should contact your
dealer immediately if you find anything is missing or damaged.
Important!
Item Title/Variants Part Numbers
Network Camera AXIS 2120 50 HZ (without power supply) 0126-001-01
AXIS 2120 50 HZ Europe 0126-002-01
AXIS 2120 50 HZ UK 0126-003-01
AXIS 2120 50 HZ Australia 0126-006-01
AXIS 2120 60 HZ (without power supply) 0126-011-01
AXIS 2120 60 HZ Europe 0126-012-01
AXIS 2120 60 HZ US 0126-014-01
AXIS 2120 60 HZ Japan 0126-015-01
AXIS 2120 60 HZ Australia 0126-016-01
Null Modem Cable - 16954
Mounting Assembly - 15104
Power Supply (PS-D)
Europe 14233
UK 14234
Australia 14255
USA 14253
Japan 14254
PS-D Extension Cable 3.3 meter 15187
Printed Materials
AXIS 2120 Installation Guide v1.0 (or later) 17618
Product Warranty Document 18489
Disk Media AXIS Network Camera CD v1.2 (or later) -
To accommodate the different power supply frequencies found in the USA and Europe, the AXIS 2120 is
available in 60Hz and 50Hz variants.
The 60Hz variant delivers a resolution of 525 lines of at 60 half-frames per second and is suitable for use
in the United States; whereas the 50Hz variant delivers 625 lines at 50 half-frames per second and is
appropriate for use in Europe.