Filter
Top Products
Choosing Your Application AXIS 2120 User’s Manual
32
Sequentially Uploading Images to a Remote FTP Server
Ideal for any busy Web site where a large audience is expected, this application uploads
images to a designated FTP server on your network to provide image access to an
unlimited amount of viewing clients over your intranet or the Internet
Simply install the AXIS 2120 directly on your local Ethernet network and complete the
Installation and Application Wizards to develop an active application that will upload
images to a designated FTP server - as a sequential stream that is unlimited, or at specified
time periods. Then organize the times and the frequency at which your images are taken
and uploaded to the target FTP server.
Installation and Configuration Overview
Configure the AXIS 2120 to actively upload images to an FTP server as follows:
1. Connect the AXIS 2120 to your local network. Refer to Installing Your Camera on a Network on page 12.
2. Open the product Home Page in your browser and start the Installation Wizard. Complete the Wizard to establish the
standard Security, Date and Time, Image General Layout and TCP/IP Network settings - selecting network as your chosen
method of connection in the Modem or Network dialog. Refer to Configuring Your Camera on page 21.
3. Continue the configuration of your product using the Application Wizard to define the target FTP server and your preferred
mode of operation - choosing Sequential mode to create your active application.
4. Having completed the Wizard, you should now verify the configuration by accessing the images stored on the FTP sever from
your browser.
AXIS 2120
LAN/WAN
Browser
Browser
Intranet or Internet