Filter
Top Products
Installing Your Camera on a Network AXIS 2120 User’s Manual
14
Verifying the Installation From Your Browser
Having completed the installation procedure above, you should then verify the connection
between the AXIS 2120 and the network, as follows:
1. Start your browser (see note below) and enter the name or IP address in the
Location/Address field:
Example!
The Home Page for your AXIS 2120 is now displayed:
2. Continue the setup and basic configuration using the Installation Wizard or
Administration Tools, as described in Configuring Your Camera, on page 21.
Important!
http://172.21.1.200/
To enable the updating of images in Microsoft Internet Explorer, you must set your browser to allow ActiveX
controls and perform a once-only installation of the Axis ActiveX component onto your workstation. However,
if your computer environment restricts or prohibits the installation of additional software components,
you can alternatively set your AXIS 2120 to use a Java applet for updating the images. This is done
from the Image settings in the Administration Tools.
Installation Wizard and
Administration Tools