Filter
Top Products
AXIS 2120 User’s Manual Choosing Your Application
37
Uploading Images to Your Internet Service Provider
Perfect for Web attractions, remote monitoring and process control applications; the AXIS
2120 can be quickly configured to dial-out from any remote location and transmit live
images to an Internet Service Provider - where your images can then be accessible to
several specific users, or the whole Internet community! You can select any of the
supported Public ISPs supported in the Application Wizard, or specify a Public or Private
ISP of your own choosing.
Having established the Dial-up connection for your AXIS 2120 using the Installation
Wizard, continue with your configuration using the Application Wizard to develop an
active application, which uploads live images to a designated ISP over standard phone
lines. You can arrange for image files to be transmitted as a sequential stream, or only at
specified time periods; and you can set the times and frequency at which images are taken
and uploaded to your ISP.
Installation and Configuration Overview
Configure the AXIS 2120 to upload images to an Internet Service Provider, as follows:
1. Connect the AXIS 2120 to the network if available. Otherwise, use the supplied Null Modem Cable. Connect a computer and
initiate a dial-up connection to the camera. For this and general information on the dial-up connection, refer to Installing
Your Camera to a Modem on page 15.
2. Create a dedicated dial-up connection.
3. Refine the dial-up parameters.
4. Initiate the dial-up connection.
5. Referring to Configuring Your Camera on page 21, open the product Home Page in your browser and start the Installation
Wizard. Complete the Wizard to establish the standard Security, Date and Time, Image General Layout and Modem settings -
selecting modem as your chosen method of connection.
6. Continue the configuration using the Application Wizard to define your preferred ISP and mode of operation - choosing
Sequential mode to upload an image sequence that is unlimited or restricted between specified time periods but independent
of any alarm event.
7. Disconnect the AXIS 2120 from the network or Null Modem Cable and connect it directly to the modem.
8. The application setup is complete. You should now verify the installation by remotely accessing the images that are now
stored by your ISP.
AXIS 2120
Modem
ISP
Internet
Browser