Filter
Top Products
Technical Specifications AXIS 2120 User’s Manual
72
Appendix G - Technical Specifications
System Requirements - The AXIS 2120 uses the standard Internet TCP/IP suite of protocols
and can be used with most operating systems: Windows 95, 98, NT and 2000, Linux, UNIX,
Mac and others. The only software required is Microsoft Internet Explorer 4.x, or higher
(used with Axis’ ActiveX component AXIS Camera Control), or Netscape 4.x.
Installation - Physical network connection using RJ-45 twisted pair cable. Remote
connection using any standard serial modem, or local computer connected using the a Null
Modem cable.
Management - Remote configuration and status using Web-based Administration Tools.
Image Features - Time/date stamp, text overlay, variable size, color CGI control, and
in-picture motion detection.
Image Resolution - CIF = 352 x 288, QCIF = 176 x144, 4CIF = 704 x 576
Networking - 10baseT Ethernet or 100baseTX Fast Ethernet, TCP/IP, HTTP, FTP, SMTP,
NTP, ARP and BOOTP.
I/O Connector - Providing a single optical-isolated alarm input, and a single digital output
(max 24V, 0.1A) that features a programmable digital input/output for remote image
storage via File Transfer Protocol (FTP) or E-mail (SMTP), pre/post alarm image storage.
Pre/Post Alarm Buffer - Up to 8 MByte memory available for pre/post alarm image storage.
Modem Connector - Single 9-pin D-SUB RS232 connector, max 115 kbps, half-duplex.
Security - Multi-user password protection.
Operating Conditions: - Temp: 41to122
o
F (+5 to +50
o
C), Humidity: 8 - 80% RHG.
Approvals - EMC: FCC Class A, :EN55024/1998, Emission: C-Tick (Australia), VCCI
(Japan),
Safety: EN 60950, UL, CSA.
Metrics: - Height: 2.2” (5.7 cm), Width: 3.4” (8.6 cm), Length: 5.4” + lens 1.8” = 7.2”
(13.8 cm + 4.5 cm = 18.3 cm), Weight: 0.55 lb. (0.25 kg) - excluding power supply.
Hardware - ARTPEC-1 compression chip; ETRAX-100, including, 32 bit RISC, 100 MIPS
CPU,
16 Mbyte DRAM, 4 Mbytes FLASH PROM.