Filter
Top Products
46
AXIS 241Q/241S - System options
RS485 - The COM ports on the AXIS 241Q/241S supports several operational modes listed
on this page. For more information, please see COM ports RS-232 and RS-485, on pag
e
51.
Maintenance
• Restart - The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
• Restore - The unit
is restarted and most current settings are reset to factory default val-
ues. The settings that are not affected are:
• the boot protocol (DHCP or static)
•
the static IP address
• the default router
•the subnet mask
• the system time
• De
fault - The default button should be used with caution. Pressing this will return all of
the video server's settings to the factory default values (including the IP address)
• Upgrade
Server - See Upgrading the firmware, on page 53.
• Backup -
To take a backup of all of the parameters, and any user-defined scripts, click
this button. If necessary, it is then possible to return to a previous configuration if set-
tings are changed and there is unexpected behavior.
• Restore -
click the Browse button to locate the saved backup file (see above) and then
click the Restore button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not
intended for multi-configurations or for firmware upgrades.
Support
Support Overview
The support overview page provides valuable information on troubleshooting and contact
information,
should you require technical assistance.
System Overview
The System Overview provides a summary of the status of the video server.
Logs & Reports
When contacting Axis support, please be sure
to provide a valid Server Report with your
query. The Access Log is automatically included in the server report.
Information
This page gives you access to the following log
files and reports that may prove useful
when troubleshooting a problem or when contacting the Axis support web.