Filter
Top Products
AXIS M1034-W Network Camera
Video and Audio
• AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec.
If achieving the best possible audio quality is a priority, AAC is the recommended codec to use. An AAC license
is included in the Axis product.
• G711
• G726
Sample rate - The number of times per second the sound is sampled. A higher sample rate will provide better audio quality, but
also requires a greater bandwidth.
Bit rate - Set the required bit rate depending on the selected encoding. A higher bit rate wil l give better a udio quality. A lower bit
rate may have latency or delay, but will require less b andwidth.
For more information about these se ttings, please see the online help
.
Audio Output
Configure the audio output settings under Video & Audio > Audio Settings.
Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the
sound is too high, choose a lower dB.
Audio Clips
An audio clip is a sound file that can be played when events occur or directly from the Live View page. The audio clip must first be
uploaded to the Axis product or recorded by a microphone connected to the product.
To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips.Formo
re information see the online help
.
To configure the A xis product to play audio clips when an event occurs, an actio
n rule must be set up. For more information, see
Events, on page 32
.
Note
Audio clips cannot be used if the prod uct’s aud io functionality is e nabled. The audio functionality is enabled on the Audio
tab under Video & Audio > Video Stream.
23