Filter
Top Products
AXIS M1034-W Network Camera
Events
Events
The Axis product can be configured to perform actions when di fferent events occur, for example, start a re c ording when motion i s
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio Detection, on page 31
.
- Motion Detection — trigger the rule when motion is detected, see
Motion Detection, on page 29
.
- PIR — trigger the rule when the PIR sensor detects motion, see
PIR Sensor, on page 31
.
- Tampering — tr igge r t he rule when tampering is detected, see
Camera Tampering, on page 29
.
• Hardware
- Network — trigger the rule if network connection is lost or restored.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see
I/O
Ports, on page 49
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 11
. This can for example be used to validate a ctions during product installation
and configuration.
• PTZ
- Moving — trigger the rule when the cam era view moves due to a PTZ op
eration. This can for example be u sed
as an additional condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a P TZ operation.
- Preset Reached —triggertherulewhenthecamerastopsatapresetposition.Thiscanbeforexamplebeused
with the Send Images action to upload images from
the preset position.
• Storage
- Available — trigger the r
ule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigge r the rule when the storage device is full. Under norma l operation, the oldest recordings will be
overwritten to prevent the storage device from becoming full.
- Locked —triggertheruleifthestoragedeviceislocked(writeprotected).
• System
- System Initializing — trigger the rule when the product is being starte d. This can for example be us ed to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 34
. This can for example be used to
upload an image every 5 minutes.
- Use Schedule — trigge r the rule according to the selected schedule, se e
Schedules, on page 34
.
Available actions include:
• Activate Light — turn the built-in light on or off.
32