Bosch Appliances VG4 Security Camera User Manual


 
8 en | VG4 Firmware Updates via a TCP/IP Network AutoDome Modular Camera System
F.01U.097.269 | 1.06 | 2011.09 Firmware Update Manual Bosch Security Systems, Inc.
3. System Controller (SC) Main/VCA Main: If the service pack contains only the SC/VCA
Main files, you can upload these files without a corresponding upload of the SC/VCA Boot
file. However, if the service pack contains an SC/VCA Boot file upgrade, there can be
incompatibility issues if the SC/VCA Boot is not uploaded before the SC/VCA Main file.
4. Custom Language: Certain Service Pack include an optional language file to upgrade the
VG4 AutoDome on-screen display menus. This firmware upgrade is installed last.
1.7.2 Selecting and Uploading Firmware Files
To upload the service pack firmware, use the following procedure:
1. Check the version of the SC firmware file to determine the service that you must start
with. See Section 1.4.2 Selecting the Service Pack, page 4.
2. Click the Search button next to the Firmware Upload field; then browse to the directory
that contains the firmware files.
Figure 1.4 Choose firmware directory
3. Select the appropriate firmware update file and click Open.
a. If a service pack contains an IP upgrade file (vip_x_app1.fw), you must upload this
file first, before performing any other firmware update. (For example, before
uploading the SCBootApp.g4i or the SCMain.g4i files.)
b. If a service pack contains an upgrade to the SC Boot file and to the VCA Boot file,
you must upload these files before uploading the SC Main and VCA_app file. The
boot files are stored in a separate Boot directory. Always check for and install these
files before installing the SC Main and VCA_app files. Browse to and open the Boot
directory, then install the SCBootApp.g4i file before installing the SCMain.g4i files
!
CAUTION! If a service pack contains an upgrade to the IP firmware file (Vip_x_app1.fw), you
must upgrade the IP firmware before you perform any other firmware update. (For example,
before uploading SCBootApp.g4i or SCMain.g4i).