Filter
Top Products
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 27
Bosch Security Systems, Inc. User Manual F.01U.215.777 | 1.0 | 2011.07
4.15 Livepage Functions
On this page you can adapt theLivepage functions to your requirements. You can choose from
a variety of different options for displaying information and controls.
1. Check the box for the items that are to be made available on the Livepage. The selected
items are indicated by a check mark.
2. Check whether the required functions are available on the Livepage.
Transmit Audio
You can only select this option if audio transmission is actually switched on (see
Section 4.30 Audio, page 38).The audio signals are sent in a separate data stream parallel to
the video data, and so increase the network load. The audio data are encoded according to
G.711 and require an additional bandwidth of approx. 80 kbps for each connection.
Lease time (s)
The lease time in seconds determines the time beyond which a different user is authorized to
control the camera after no further control signals are received from the current user. After
this time interval, the camera is automatically enabled.
Show alarm inputs
The alarm inputs are displayed next to the video image as icons along with their assigned
names. If an alarm is active, the corresponding icon changes color.
Show relay outputs
Relay outputs are shown next to the video image as icons, along with their assigned names. If
the relay is switched, the icon changes color.
Show VCA trajectories
When video content analysis (VCA) is activated, check this item to show additional
information that traces the path of objects.
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the live
video stream. For example, in Motion+ mode, the sensor areas for motion detection are
marked.
Show event log
The event messages are displayed along with the date and time in a field next to the video
image.
Show system log
The system messages are displayed along with the date and time in a field next to the video
image and provide information about establishing and ending connections, for example.
Allow snapshots
Here you can specify whether the icon for saving individual images should be displayed below
the live image. Individual images can only be saved if this icon is visible.
Allow local recording
Here you can specify whether the icon for saving video sequences on the local memory should
be displayed below the live image. Video sequences can only be saved if this icon is visible.
Path for JPEG and Video files
1. Enter the path for the storage location of individual images and video sequences that you
can save from the Livepage.
2. If necessary, click Browse to find a suitable directory.