Filter
Top Products
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 7
Bosch Security Systems, Inc. User Manual F.01U.215.777 | 1.0 | 2011.07
If you choose to use a computer running Microsoft Internet Explorer or any of the Bosch
software, the computer must conform to the following minimum requirements:
– Operating System: Windows XP (Service Pack 3) or Windows 7 (32 or 64 bits)
– Processor: Intel Pentium Quad Core, 3.0 GHz or comparable
– RAM: 2048 MB
– Free Hard Disk Space: 10 GB
– Video system: NVIDIA GeForce 8600 or higher display with a minimum of 16-bit color
– Network interface: 100/1000-BaseT
– Software:
– Microsoft Internet Explorer, version 7.0 or higher
– Bosch Video Client (BVC)
– DirectX 9.0c
– MPEG ActiveX utility
– Sun Java Virtual Machine
For the latest versions of the Bosch Video Client, DirectX, ActiveX, and the Sun Java Virtual
Machine software, go to www.boschsecurity.com, then navigate to the AutoDome 700 Series
product page and download the software from the Software tab.
2.3 Connecting the AutoDome 700 Series to the PC
1. Install the AutoDome 700 Series according to the instructions in the VG5 AutoDome
Installation manual.
2. Connect an Ethernet cable from the AutoDome 700 Series RJ45 connector to a dedicated
network switch to bypass the Local Area Network (LAN).
3. Connect the dedicated network switch to the RJ45 connector on the PC (see option A
below).
Figure 2.1 AutoDome 700 Series System Configuration
NOTICE!
Ensure the graphics card is set to 16-bit or 32-bit color. If you need further assistance, contact
your PC system administrator.
NOTICE!
The AutoDome 700 Series can also be connected directly to a PC using an Ethernet crossover
cable with RJ45 connectors (see option B below).
1 AutoDome 700 Series
2IP Connection
3 Network Switch
4Computer