Filter
Top Products
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 37
Bosch Security Systems, Inc. User Manual F.01U.215.777 | 1.0 | 2011.07
4.26 Preposition and Tours
The AutoDome 700 Series can store up to 99 preset scenes and this section allows you to
define the individual scenes and a preposition tour comprised of the defined scenes.
You define individual preposition scenes, then use these scenes to define the preposition
tour. The tour starts from the lowest scene number in the tour and progresses sequentially to
the highest scene number in the tour. The tour displays each scene for a specified dwell time
before advancing to the next scene.
By default, all scenes are part of the preposition tour unless removed.
To define and edit an individual scene:
1. Navigate to the scene that you want to define as a preposition.
a. Click the View Control link.
b. Use the PTZ controls to move the camera into position.
2. Click the Add scene (“+”) button to define the preposition.
3. Select a number for the scene, from 1 to 99.
4. Type an optional name for the scene, up to 20 characters long.
5. Click OK to save the scene to the Preposition list.
The asterisk (*) to the left of the scene name indicates the scene is part of the
preposition tour.
6. To delete a scene from the list, select the scene and click the Delete scene (“X”) button.
7. To overwrite an existing scene:
a. Click the View Control link to access the PTZ controls.
b. Use the PTZ controls to navigate to the new scene.
c. Click the scene in the Preposition list you want to overwrite.
d. Click the Overwrite scene button to apply the new scene to the existing preposition.
e. To change the name of the scene, double-click the scene in the list. Then, change the
name in the Edit Scene dialog box and click OK.
8. To view a scene in the preview window, select the scene in the list and click the Show
scene button.
9. To view a scene from the Livepage:
a. Click a scene number below the PTZ controls on the View Control tab.
b. Use the keypad and the Show Shot button on the Aux Control tab.
To define a preposition tour:
1. Create the individual scenes.
By default, all scenes in the Preposition list are in the preposition tour.
2. To remove a scene from the tour, select the scene in the list and uncheck the Include in
standard tour box.
3. Select a dwell time from the Standard preposition tour drop-down list.
4. To start the preposition tour:
a. Return to the Livepage.
b. Click the Aux Control tab.
c. Type 8 in the input box and click the Aux On button.
5. To stop the tour, type 8 and click the Aux Off button.