Filter
Top Products
161
You can magnify the image by 1.5x to 10x on the LCD monitor.
1
Magnify the image.
During image playback, press the
<u> button.
X The image will be magnified.
If you hold down the <
u
> button, the
image will continue to be magnified until
it reaches the maximum magnification.
To reduce the magnification, press
the <y> button. If you hold down the
button, the magnification will continue
to reduce to the single image display.
2
Scroll around the image.
Use <9> to scroll around the
magnified image.
To exit the magnified display, press the <
x
>
button and the single image display will return.
Magnified View’s Starting Position
Normally, the magnified view starts at the image center. When the [4
Enlarge display] menu option is set to [Enlarge from selected AF
point], the magnified view starts at the selected AF point. This is
convenient for quickly checking the focus.
u/y Magnified View
Magnified area position
While in the magnified view, you can keep the same magnified area and
magnification when you turn the <5> dial to view another image.
In the case of images shot with automatic AF point selection or with
manual focus <g>, the magnification will start at the image center.
Magnified view is not possible during the image review immediately after
the image is taken.
With [Enlarge from selected AF point]
•
The starting magnification varies depending on the image size that was set.
• If C.Fn III -8-1/2/3 is set, the focusing point area will be expanded and the
magnified view starts from the AF point that actually achieved focus. Therefore,
the view may not be magnified from the manually-selected AF point.
A movie cannot be magnified.
COPY