Filter
Top Products
256
If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
* If the error still persists, write down the error No. and contact your nearest
Canon Service Center.
Error Codes
No. Error Message & Solution
01
Communications between the camera and lens is faulty. Clean the
lens contacts.
ÎClean the electrical contacts on the camera and lens and use a
Canon lens. (p.13, 16)
02
Card * cannot be accessed. Reinsert/change card * or format card
* with camera.
ÎRemove and install the card again, replace the card, or format the
card (p.36, 50).
04
Cannot save images because card * is full. Replace card *.
ÎReplace the card, erase unnecessary images, or format the card
(p.36, 179, 50).
06
Sensor cleaning is not possible. Turn the camera off and on
again.
ÎOperate the power switch (p.34).
10, 20,
30, 40,
50, 60,
70, 80,
99
Shooting is not possible due to an error. Turn the camera off and
on again or re-install the battery.
ÎOperate the power switch, remove and install the battery pack
again, or use a Canon lens (p.34, 32).
Error No.
Countermeasures
COPY