Filter
Top Products
126
If you use AC Adapter Kit ACK800 (sold separately), you can use the
camera without worrying about how much charge is left in the batteries.
Turn the camera off.
Plug the cord into the camera.
● Open the camera’s terminal cover and
insert the plug into the camera.
Connect the power cord.
● Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
High-Power Flash HF-DC1 (sold separately) is used to supplement the
camera’s built-in flash when the subject is too far away for proper
illumination. For details on attaching and using the High-Power Flash, refer
to the user guide provided with the flash.
Using Household Power
Do not unplug the power cord with the camera turned on. This could
erase images you have taken or damage the camera.
Using a Supplementary Flash
(EC248) CDI-E386_Guide_E.book Page 126 Thursday, June 19, 2008 4:52 PM
COPY