Filter
Top Products
Error Messages
133
Incompatible WAVE
• Since the data type of the existing sound memo is incorrect., no new sound memo
can be added or played back (p. 107).
Naming error!
• The file name could not be created because there is an image with the same name
as the folder that the camera is attempting to create, or the highest possible file
number has already been reached (p. 120). In the 3 tab, set [File Numbering] to
[Auto Reset] (p. 119) or format the memory card (p. 49).
Cannot transfer!
• Unsupported or corrupted image data cannot be transferred, even when set in Direct
Transfer (pp. 34, 108).
• Movies selected in [Wallpaper] cannot be transferred (p. 108).
Too many marks
• The number of images for print settings or transfer settings exceeds 998. Set 998 or
less images for print or transfer (pp. 109, 111).
Cannot complete!
• Print settings or transfer settings could not be saved correctly. Reduce the number of
settings and try again (pp. 109, 111).
Unselectable image
• Unsupported images cannot be set for printing (p. 111).
• Images manipulated on a computer, that have had their file name changed, or have
been taken with a different camera may not be supported.
Communication error
• Images could not be transferred to the computer due to the large amount of images
(approx. 1000) stored on the memory card. Use a commercially available USB card
reader to transfer the images.
Lens error, restart camera
• A lens error was detected. Press the power button to turn the camera off and back on
(p. 22). If this error message continues to display, contact your Canon Customer
Support Help Desk as there may be a problem with the lens.
• This error can occur if you hold the lens while it is in motion or when using it in a
location with excessive dust or sand in the air.
Exx (xx: number)
• Camera detected an error. Press the power button to turn the power off and then
back on (p. 22). If an error code displays directly after taking a picture, the shot may
not have been recorded. Check image in playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
(EC248) CDI-E386_Guide_E.book Page 133 Thursday, June 19, 2008 4:52 PM
COPY