Filter
Top Products
100 Replaying
Automated Playback (Slide Show) (continued)
Selecting Images for Slide Shows
You can mark images for inclusion in slide shows 1-3. Up to 100 images may be
marked per slide show. Images display in the order of their selection.
1
Display the slide show menu (p. 99).
2
Select [Program] using C on the
multicontroller. Then select [Show 1],
[Show 2] or [Show 3] using B or A on
the multicontroller.
• A bright green bar will appear beside a show
already containing images.
3
Choose [Select] using D, and B or A on the multicontroller and
press
.
4
Mark images to include in the show.
Single Replay
• Move between images using B or A on the
multicontroller and mark or remove marks from
images using C or D on the multicontroller.
• The selection number and a bright green bar
appear at the top of marked images.
Index Replay
• Press the
button to switch to index replay (3
images).
• Select an image using B or A on the
multicontroller and mark or remove marks from
images using C or D on the multicontroller.
• The selection number and a bright green bar
appear at the bottom of marked images.
• You can deselect all the images in a show by
pressing
, selecting [OK] using B or A on
the multicontroller and pressing
again.