Filter
Top Products
Shooting - Letting the Camera Select Settings 55
3
Shoot the first image.
• The exposure and white balance settings are set and locked with the first image.
4
Compose and shoot the second image so
that it overlaps the first.
• Minor discrepancies in the overlap can be corrected
with the software.
• An image can be retaken. Press B or A on the
multicontroller to return to that frame.
5
Use the same procedures to shoot the remaining frames.
• A maximum of 26 images can be recorded either horizontally or vertically.
6
Press
after the last shot.
• The digital zoom, flash (red-eye reduction auto, auto, red-eye reduction),
continuous mode (
, ), AEB, AE lock, FE Lock, AF frame, light metering, file
format (RAW), and image adjustment (ISO speed, contrast, sharpness and
saturation) settings cannot be adjusted in this mode.
• A TV cannot be used as the monitor for shooting in this mode.
• The zoom, flash (on / off), resolution, macro mode, exposure, white balance* and
flash exposure compensation settings can only be adjusted for the first image. The
selected settings are applied to the subsequent images and cannot be changed.
* A custom white balance setting cannot be set in
mode. To use a custom
white balance setting, first set it in another shooting mode.
Sequence
Sequence