Filter
Top Products
107
E
Editing
1. On the VCR, locate a point 3 seconds before the scene to be inserted. Set the
VCR to playback pause mode.
2. On the camcorder, press PLAY and locate the recording start point. Set the
camcorder to playback pause mode.
•You can use the playback buttons on the body of the camcorder or the special playback
functions on the wireless controller in the same way as in playback mode.
3. Press the AV INSERT button.
•AV INSERT and 2a appear in the display.
4. Play back the tape in the VCR.
5. To start inserting, press the e/a (play/pause) button on the camcorder.
• 2a changes to 2.
6. To stop inserting, press the STOP button on the camcorder.
• Inserting stops and AV INSERT disappears from the display. The camcorder returns to stop
mode.
• If instead of pressing STOP you press e/a (play/pause), the camcorder returns to the AV insert
pause mode.
• If you set the zero set memory at the position on the tape where you wish to stop inserting,
every time you return to that point, the camcorder will cancel its AV inserting and enter stop
mode.
7. Stop playback on the VCR.
Editing