Filter
Top Products
When operating faders in TAPE CAMERA mode, make sure the program selector is set to Q.
1. Press the D.EFFECTS/BARS SELECT button.
• The digital effects menu appears.
2. Select FADER and press the SELECT dial in.
•FADE-T, WIPE and OVERLAP settings appear.
3. Select WIPE or OVERLAP and press the D.EFFECTS/BARS SELECT button.
• The menu closes and the name of the selected fader flashes in the display.
4. Press the D.EFFECTS/BARS ON/OFF button during recording.
• The name of your selection stops flashing.
• Each time you press the D.EFFECTS ON/OFF button, the chosen fader becomes activated
(display lights continuously) or deactivated (display flashes).
5. Press the start/stop button.
• The last scene is memorized as a still image and the camcorder goes into record pause mode.
6. Press the start /stop button.
• Recording starts, and the still image gradually changes to the scene you are recording.
64
E
Recording
+
CAMERA
TAPE
Operating Wipe and Overlap
FADER••••••• OVERLAPFADER
( 20)
During recording