Filter
Top Products
18
E
Preparations
1. Attach a power source.
2. Slide the OPEN/EJECT button and release the cassette compartment cover.
•Wait for the cassette compartment to open automatically.
• The confirmation beep sounds when it is fully opened.
3. Load or unload the cassette.
• Insert the cassette gently with the window facing outward.
• Remove the cassette by pulling it straight out.
4. Press the P mark on the compartment until it clicks.
5. Click the cover back into place.
Notes:
• Do not interfere with the cassette compartment while it is opening or closing, or attempt to close
the cover.
• Be careful not to get your fingers caught in the cassette compartment cover.
• Do not leave the cassette in the camcorder after use — return it to its case and store it in a cool,
clean, dry place.
• When no cassette is loaded, v flashes in the display.
•With some types of tapes, the remaining tape display may not give an accurate reading.
Use only videocassettes marked with the DV logo.*
CLOSE THIS FIRST.
* D logo is a trademark.
Loading and Unloading
Loading a Cassette