Filter
Top Products
63
E
Recording
The camcorder retains the last recorded scene as a still
image before entering the record pause mode. When
you start recording, the still image gradually changes to
the scene you are recording.
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program selector is set to Q.
1. Press the D.EFFECTS/BARS SELECT button.
• The digital effects menu appears.
2. Select FADER and press the SELECT dial in.
•FADE-T, WIPE and OVERLAP settings appear.
3. Select the FADE-T and press the D.EFFECTS/BARS SELECT button.
• The menu closes and FADE-T flashes in the display.
4. Press the D.EFFECTS/BARS ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the D.EFFECTS/BARS ON/OFF button, the fader is activated (display lights
continuously) or deactivated (display flashes).
5. Press the start/stop button.
+
CAMERA
TAPE
Overlap
Operating the Fade Trigger
FADER••••••• FADE-TFADER
( 20)