Canon GL2 Camcorder User Manual


 
85
E
Recording
The zebra pattern is a series of diagonal stripes that appear in the viewfinder to highlight areas of
overexposure. Use it as a guide to set the aperture (iris) and shutter speed.
You can also select the pattern appearance level from 80, 85, 90, 95, and 100%.
Using the Zebra Pattern
Note:
The camcorder does not record the zebra pattern, it is only shown in the display.
1. Open the menu and select CAM. SET UP.
2. Select ZEBRA LEVEL and select the level.
3. Close the menu.
1. Open the menu and select CAM. SET UP.
2. Select ZEBRA LEVEL and set it to ON.
3. Close the menu.
ZEBRA LEVEL• 90
CAM. SET UP
( 20)
ZEBRA••••••• OFFCAM. SET UP
( 20)
+
,
+
CAMERA
CARD
CAMERA
TAPE
+
,
+
CAMERA
CARD
CAMERA
TAPE
Selecting the Zebra Pattern Level
Activating the Zebra Pattern