Filter
Top Products
Checking for Shut Eyes
101
When the camera detects the possibility that people have their eyes shut,
appears on the screen.
Choose [Blink Detection].
z Press the n button to choose [Blink
Detection] from the 4 tab, then press the
qr buttons to choose [On].
Shoot.
XWhen a person with shut eyes is detected,
a frame and appear on the screen.
You can use a TV to display the camera screen content while shooting.
• To connect the camera to a TV, follow the Steps in “Viewing Images on a
TV” (p. 132).
• Shooting procedures are the same as when using the camera screen.
Red-eye correction may be applied to areas other than red eyes. For
example, when red make-up has been used around eyes.
• You can also correct recorded images (p. 150).
• If you press the r button then immediately press the n button when
the flash is raised, the screen in Step 2 will appear.
Checking for Shut Eyes
• This function is only available for the last image shot when you have set
the camera to 2 or more shots in or $ mode.
• Not available in W, or mode.
TV display is not available when using HDMI Cable HTC-100 (sold
separately) to connect the camera to an HD TV.
Shooting Using a TV as the Display
COPY