Canon SX230 HS Digital Camera User Manual


 
Adding Effects and Shooting (Creative Filters)
74
Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Choose Y.
z Follow Steps 1 – 2 on p. 69 to choose Y.
Press the l button.
XThe unchanged image and the Color Swap
image will alternately display.
z The default setting is to change green to
gray.
Specify the color to be swapped.
z Position the center frame so it is filled with
the color you want and press the q button.
XThe specified color will be recorded.
Specify the target color.
z Position the center frame so it is filled with
the color you want and press the r button.
XThe specified color will be recorded.
Specify the range of colors to be
swapped.
z Press the op buttons or turn the  dial
to adjust the range of colors to be
changed.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Press the l button to complete the
setting and restore the shooting screen.
Using the flash may cause unexpected results in this mode.
Under some conditions, the image may appear coarse.
COPY