Filter
Top Products
Using the GPS Function
105
Set [GPS] to [On].
z Follow Steps 1 and 2 on p. 103 to change
the setting.
Choose a setting.
z Press the op buttons or turn the  dial
to choose [GPS Logger], then press the
qr buttons to choose [On].
Complete the setting.
z When you press the n button, a
message about the logger function will
appear on the screen. After checking the
message, press the m button.
Turn off the camera.
XAfter a message appears on the screen
about the logger function, the camera will
turn off.
XEven when the camera is turned off, the
indicator will blink to notify you that the
logger function is operating.
XAt certain intervals, the positioning data
and date/time based on the GPS satellite
signal will be recorded in a log file.
How do I check if a GPS log file was created?
will appear in the upper right of the screen in Step 2 when a GPS log file is
created. If this icon appears, exercise caution when formatting a memory card
(pp. 22, 165), as all GPS log files will also be erased.
When you do not want to use the logger function, set it to [Off].
If [GPS Logger] is set to [On], battery power will be consumed even when the
camera is turned off. If the camera is in an environment where a GPS signal
cannot be received (indoors, etc.), the battery may be depleted in half a day even
if you do not shoot. Be sure to set [GPS Logger] to [Off] in Step 2 to prevent
battery consumption when not using the logger function.
COPY