Filter
Top Products
Detecting a Face and Shooting (Smart Shutter)
77
Using the Face Self-Timer
The shutter will release approximately two seconds after the camera detects
a new face (p. 91). You can use this when the photographer wants to be in
the image, such as a group photo.
Choose .
z Follow Steps 1 – 2 on p. 66 to choose ,
then press the l button.
z Press the qr buttons or turn the  dial to
choose , then press the l button.
Compose the shot and press the
shutter button halfway.
z Make sure a green frame appears on the
face focused on and white frames appear
on other faces.
Press the shutter button fully.
XThe camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
XThe lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
XWhen the camera detects a new face, the
lamp and self-timer sound will speed up
(the lamp remains lit when the flash will
fire), and two seconds later the shutter will
release.
• Shutting both eyes will also be detected as a wink.
• If a wink is not detected, the shutter will release approximately 15
seconds later.
• If there are no people in the shot when the shutter button is pressed fully,
the camera will shoot after a person enters the shot and winks.
COPY