Filter
Top Products
111
In D mode, you can choose 3 levels of flash output.
Set the mode dial to D.
Choose the flash output level.
z After pressing the m button, press the
op buttons or turn the  dial to choose
~, then press the m button.
Complete the setting.
z Press the op buttons or turn the  dial
to choose the flash output, then press the
m button.
XOnce set, ~ will appear on the screen.
Adjusting the Flash Output
• You can also set the flash output by pressing the n button to choose
[Flash Settings] (p. 100) from the 4 tab, then choose [Flash Output] and
press the qr buttons to choose a setting.
• In M and B modes, you can set the flash output if you press the
n button to choose [Flash Settings] from the 4 tab, then set [Flash
Mode] to [Manual].
• With the flash raised, if you press the r button and immediately press the
n button, the setting screen will appear.
COPY