Filter
Top Products
Using an Eye-Fi Card
178
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
z Press the n button to choose [Eye-Fi
Settings] from the 3 tab, then press the
m button.
z Press the op buttons or turn the  dial
to choose [Connection info], then press the
m button.
z The connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
z Press the n button to choose [Eye-Fi
Settings] from the 3 tab, then press the
m button.
z Press the op buttons or turn the  dial
to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].
• The power saving function does not work while transferring images
(p. 52).
• If mode is chosen, the Eye-Fi connection will be interrupted.
Choosing another Shooting mode or entering Playback mode will reopen
the Eye-Fi connection, but movies made with mode may be
retransferred.
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the
camera, or when an Eye-Fi card’s write-protect tab is in the locked position. For
this reason, settings cannot be changed for Eye-Fi cards equipped with a write-
protect tab when the tab is in the locked position.
COPY