Filter
Top Products
APPENDIX
199
Power does not turn on.
Camera suddenly powers
down.
Image is not recorded
when the shutter button is
pressed.
1) The batteries are not oriented correctly.
2) The batteries are dead.
3) You are using the wrong type of AC adaptor.
1) Auto Power Off activated (page 46).
2) The batteries are dead.
1) The camera is in the PLAY mode.
2) Flash unit is being charged.
3) Memory is full.
1) Orient the batteries correctly (page 39).
2) Charge the batteries (page 34). If the batteries
go dead soon after being charged, it means
they have reached the end of their life and need
to be replaced. Purchase separately available
rechargeable nickel-metal hydride batteries
(HR-3U), or replace the batteries with other
ones.
3) Use only the type of AC adaptor (AD-C30)
specified for this camera.
1) Turn power back on.
2) Charge or replace the batteries.
1) Press [
] (REC) to enter the currently
selected recording mode.
2) Wait until the flash unit finishes charging.
3) Transfer files you want to keep to your
computer and then delete files from image
memory, or use a different memory card.
Power Supply
Image Recording
Symptom Possible Cause Action
Troubleshooting Guide